Waves and Optics

Radioactivity and Stability of Isotopes - Terminologies used in radioactivity

By the end of the lesson, the learner should be able to:

- Define terms used in radioactivity including atom, nuclide, half-life and radioisotope
- Explain factors that determine nuclear stability
- Connect radioactivity concepts to medical imaging and carbon dating

In groups, learners are guided to:

- Use digital devices or reference books to find meanings of radioactivity terms
- Discuss atomic number, mass number and isotopes
- Explain nuclear stability and background radiation
- Share findings on terminology in class discussion

What makes some atomic nuclei stable while others are unstable?

- Triumph Physics 10 pg. 169
- Digital devices
- Reference books
- Periodic table

- Oral questions - Written assignments - Observation

Waves and Optics

Radioactivity and Stability of Isotopes - Types and properties of alpha, beta and gamma radiations

By the end of the lesson, the learner should be able to:

- Describe the nature, charge and mass of alpha, beta and gamma radiations
- Compare penetrating power and ionising effects of the three radiations
- Connect radiation properties to their use in smoke detectors and medical treatment

In groups, learners are guided to:

- Study cards showing properties of alpha, beta and gamma emissions
- Discuss nature, charge and mass of each radiation type
- Compare penetrating power and ionising effects
- Summarise properties on manila paper for presentation

Why is alpha radiation most dangerous inside the body but least dangerous outside?

- Triumph Physics 10 pg. 171
- Property cards
- Manila paper
- Markers

- Oral questions - Written assignments - Observation

Waves and Optics

Radioactivity and Stability of Isotopes - Behaviour of radiations in electric and magnetic fields

By the end of the lesson, the learner should be able to:

- Describe how alpha, beta and gamma radiations behave in electric and magnetic fields
- Draw diagrams showing deflection of radiations in fields
- Connect radiation deflection to particle accelerators and mass spectrometers

In groups, learners are guided to:

- Draw bar charts comparing penetrating power and ionising effects
- Draw diagrams showing deflection in electric and magnetic fields
- Discuss why gamma rays are not deflected
- Present charts to class for peer learning

Why are alpha and beta particles deflected in opposite directions in electric and magnetic fields?

- Triumph Physics 10 pg. 173
- Manila paper
- Coloured pencils
- Rulers

- Practical assessment - Written assignments - Observation

Waves and Optics

Radioactivity and Stability of Isotopes - Nuclear equations showing how radionuclides attain stability
Radioactivity and Stability of Isotopes - Decay series and chain reactions

By the end of the lesson, the learner should be able to:

- Write balanced nuclear equations for alpha, beta and gamma decay
- Balance mass numbers and atomic numbers in nuclear equations
- Connect nuclear decay to energy production in nuclear power plants

In groups, learners are guided to:

- Learn the three main types of radioactive decay
- Write nuclear equations for alpha decay (e.g., Uranium-238 to Thorium-234)
- Write nuclear equations for beta decay
- Practise balancing nuclear equations

How do unstable nuclei transform to achieve stability through radioactive decay?

- Triumph Physics 10 pg. 175
- Periodic table
- Chart of nuclides
- Exercise books
- Triumph Physics 10 pg. 178
- Uranium-238 decay chart

- Written assignments - Oral questions - Observation

Waves and Optics

Radioactivity and Stability of Isotopes - Safety precautions in handling and disposing of radioactive substances

By the end of the lesson, the learner should be able to:

- List effects of radiation exposure on human health
- Describe safety precautions when handling radioactive materials
- Connect radiation safety to protection measures in hospitals and nuclear facilities

In groups, learners are guided to:

- Research safety precautions for handling radioactive substances
- Discuss personal protective equipment needed
- Discuss proper methods for storing and disposing radioactive waste
- Create safety poster for class presentation

What safety measures must be followed to minimise radiation exposure?

- Triumph Physics 10 pg. 179
- Digital devices
- Manila paper
- Markers

- Oral questions - Written assignments - Observation

Waves and Optics

Radioactivity and Stability of Isotopes - Detection of radioactive emissions using photographic plates and electroscopes

By the end of the lesson, the learner should be able to:

- Explain how photographic emulsions detect radiation
- Describe how a leaf electroscope detects radiation
- Connect radiation detection to radiation badges worn by hospital workers

In groups, learners are guided to:

- Observe demonstration of photographic plate detection
- Construct a simple electroscope and observe discharge near radioactive material
- Discuss how ionisation affects charge on foil strips
- Compare detection methods and their applications

How do photographic plates and electroscopes indicate the presence of radiation?

- Triumph Physics 10 pg. 180
- Photographic plates
- Electroscope materials
- Radioactive source

- Practical assessment - Oral questions - Observation

Waves and Optics

Radioactivity and Stability of Isotopes - Detection using Geiger-Muller counter and cloud chamber

By the end of the lesson, the learner should be able to:

- Describe the working principle of a Geiger-Muller counter
- Explain how cloud chambers make radiation tracks visible
- Connect radiation detectors to nuclear safety monitoring and scientific research

In groups, learners are guided to:

- Research how Geiger-Muller counter and cloud chamber work
- Identify characteristics of tracks from alpha, beta and gamma radiations
- Discuss advantages and limitations of each detection method
- Present findings on detection methods

How does a Geiger-Muller counter convert radiation into measurable signals?

- Triumph Physics 10 pg. 183
- Digital devices
- Reference books
- Manila paper

- Written assignments - Oral questions - Observation

Waves and Optics

Radioactivity and Stability of Isotopes - Half-life and decay curves

By the end of the lesson, the learner should be able to:

- Define half-life and use the decay formula to calculate remaining nuclides
- Plot and interpret decay curves
- Connect half-life to carbon dating of archaeological artefacts

In groups, learners are guided to:

- Demonstrate half-life using water draining from a burette
- Record time taken for different volumes to drain
- Plot decay curve and determine half-life from graph
- Calculate remaining mass after multiple half-lives

How can half-life be used to determine the age of ancient objects?

- Triumph Physics 10 pg. 185
- Burette
- Stopwatch
- Beaker
- Graph paper

- Practical assessment - Written assignments - Oral questions

Waves and Optics

Radioactivity and Stability of Isotopes - Nuclear fission, fusion and applications of radioactivity

By the end of the lesson, the learner should be able to:

- Differentiate between nuclear fission and nuclear fusion
- Write nuclear equations for fission and fusion reactions
- Connect nuclear reactions to power generation, medical imaging and cancer treatment

In groups, learners are guided to:

- Study pictures of nuclear fission reactions
- Discuss chain reactions and their control in nuclear reactors
- Research applications of radioactivity in medicine, industry and agriculture
- Present findings on applications to class

How do nuclear power plants harness fission energy while preventing uncontrolled chain reactions?

- Triumph Physics 10 pg. 189
- Digital devices
- Pictures of nuclear reactions
- Reference books

- Written assignments - Oral questions - Observation

Waves and Optics

Radioactivity and Stability of Isotopes - Nuclear fission, fusion and applications of radioactivity

By the end of the lesson, the learner should be able to:

- Differentiate between nuclear fission and nuclear fusion
- Write nuclear equations for fission and fusion reactions
- Connect nuclear reactions to power generation, medical imaging and cancer treatment

In groups, learners are guided to:

- Study pictures of nuclear fission reactions
- Discuss chain reactions and their control in nuclear reactors
- Research applications of radioactivity in medicine, industry and agriculture
- Present findings on applications to class

How do nuclear power plants harness fission energy while preventing uncontrolled chain reactions?

- Triumph Physics 10 pg. 189
- Digital devices
- Pictures of nuclear reactions
- Reference books

- Written assignments - Oral questions - Observation

Electricity and Magnetism

Electrostatics - Origin of charges in a material

By the end of the lesson, the learner should be able to:

- Explain the structure of an atom and origin of electric charges
- Describe how materials become positively or negatively charged
- Connect static electricity to everyday experiences like getting shocked after walking on carpet

In groups, learners are guided to:

- Discuss the origin of charges on materials (atom, nucleus, protons, neutrons, electrons)
- Perform experiments rubbing balloons on woollen cloth
- Observe attraction and repulsion of charged objects
- Discuss SI unit of charge and law of electrostatics

How do objects become electrically charged through the transfer of electrons?

- Triumph Physics 10 pg. 194
- Balloons
- Woollen cloth
- Small pieces of paper

- Oral questions - Observation - Practical assessment

Electricity and Magnetism

Electrostatics - Electric field patterns around charges

By the end of the lesson, the learner should be able to:

- Define an electric field and describe its properties
- Draw electric field patterns for isolated and interacting charges
- Connect electric fields to how lightning rods protect buildings

In groups, learners are guided to:

- Discuss the meaning of electric field and its properties
- Draw field patterns for isolated positive and negative charges
- Draw field patterns between like and unlike charges
- Draw field patterns between charged plates

Why do electric field lines never cross each other?

- Triumph Physics 10 pg. 196
- Manila paper
- Coloured pencils
- Rulers

- Written assignments - Oral questions - Observation

Electricity and Magnetism

Electrostatics - Law of electrostatics
Electrostatics - Charging by friction and contact methods

By the end of the lesson, the learner should be able to:

- State the law of electrostatics
- Demonstrate attraction and repulsion between charged objects
- Connect electrostatic forces to how dust clings to TV screens and plastic surfaces

In groups, learners are guided to:

- Suspend a charged plastic ruler and bring another charged ruler close
- Observe attraction and repulsion between similarly and oppositely charged objects
- Rub glass rod with silk and observe interaction with charged ruler
- Discuss the law of electrostatic charges

What determines whether two charged objects will attract or repel each other?

- Triumph Physics 10 pg. 199
- Plastic rulers
- Glass rod
- Silk cloth
- Woollen cloth
- Triumph Physics 10 pg. 200
- Plastic pen
- Dry woollen cloth
- Polystyrene ball
- Glass rod

- Practical assessment - Oral questions - Observation

Electricity and Magnetism

Electrostatics - Charging by induction and separation methods

By the end of the lesson, the learner should be able to:

- Explain charging by induction and separation methods
- Demonstrate charging without direct contact
- Connect charging by induction to electrostatic spray painting in industries

In groups, learners are guided to:

- Bring charged polythene rod near insulated metal ball without touching
- Earth the metal ball while charged rod is near, then remove earthing
- Demonstrate charging by separation using two touching metal balls
- Sketch charge distribution during induction process

Why does the charge acquired by induction have opposite sign to the charging rod?

- Triumph Physics 10 pg. 203
- Polythene rod
- Metal balls on insulated stands
- Connecting wire

- Practical assessment - Oral questions - Observation

Electricity and Magnetism

Electrostatics - Charge distribution on conductors of various shapes

By the end of the lesson, the learner should be able to:

- Explain how charges distribute on conductors of different shapes
- Draw charge distribution on spherical, wedge-shaped and pear-shaped conductors
- Connect charge concentration at points to lightning conductors and Van de Graaff generators

In groups, learners are guided to:

- Research charge distribution on different shaped conductors
- Draw diagrams showing charge distribution on spherical, wedge-shaped, pear-shaped and sharp conductors
- Discuss why charges concentrate at pointed ends
- Present findings on charge distribution to class

Why do charges concentrate at the pointed ends of conductors?

- Triumph Physics 10 pg. 205
- Digital devices
- Reference books
- Manila paper

- Written assignments - Oral questions - Observation

Electricity and Magnetism

Electrostatics - Functions of various parts of an electroscope

By the end of the lesson, the learner should be able to:

- Identify and state functions of parts of a gold leaf electroscope
- Construct a simple electroscope using locally available materials
- Connect electroscope operation to radiation monitoring badges used by hospital workers

In groups, learners are guided to:

- Observe an electroscope and identify its main parts
- Research functions of metallic cap, metal rod, gold leaf and glass casing
- Construct a simple electroscope using paper clip, aluminium foil and plastic container
- Test the constructed electroscope with charged objects

How does each part of an electroscope contribute to detecting electric charges?

- Triumph Physics 10 pg. 207
- Gold leaf electroscope
- Paper clips
- Aluminium foil
- Plastic container

- Practical assessment - Oral questions - Observation

Electricity and Magnetism

Electrostatics - Charging an electroscope by contact and induction

By the end of the lesson, the learner should be able to:

- Describe how to charge an electroscope by contact and induction
- Demonstrate charging and discharging an electroscope
- Connect electroscope charging to understanding how photocopiers transfer toner to paper

In groups, learners are guided to:

- Touch charged polythene rod to metallic cap and observe leaf divergence
- Discharge electroscope by touching cap and observe leaf collapse
- Charge electroscope by induction using charged rod and earthing
- Compare charges acquired by contact and induction methods

Why does the electroscope leaf diverge when the cap is touched by a charged object?

- Triumph Physics 10 pg. 208
- Gold leaf electroscope
- Polythene rod
- Glass rod
- Silk and woollen cloth

- Practical assessment - Oral questions - Observation

Electricity and Magnetism

Electrostatics - Uses of a leaf electroscope

By the end of the lesson, the learner should be able to:

- Describe uses of an electroscope in testing for charges
- Use an electroscope to test presence, type and quantity of charge
- Connect electroscope uses to quality control testing in manufacturing industries

In groups, learners are guided to:

- Use electroscope to test for presence of charge on objects
- Determine type of charge by observing leaf behaviour with known charges
- Compare quantity of charge by degree of leaf divergence
- Test conductivity of different materials using electroscope

How can an electroscope be used to determine both the presence and type of charge?

- Triumph Physics 10 pg. 210
- Gold leaf electroscope
- Various charged objects
- Different materials for testing

- Practical assessment - Written assignments - Observation

Electricity and Magnetism

Electrostatics - Applications of electrostatics in day-to-day life

By the end of the lesson, the learner should be able to:

- Describe applications of electrostatics in various fields
- Explain safety measures against electrostatic hazards
- Connect electrostatics to spray painting, photocopiers, air purifiers and lightning protection

In groups, learners are guided to:

- Research applications of electrostatics using digital devices
- Discuss spray guns, photocopiers, fingerprinting and electrostatic precipitators
- Discuss lightning formation and safety measures during thunderstorms
- Present findings on applications and safety to class

How do electrostatic precipitators help reduce air pollution from factory emissions?

- Triumph Physics 10 pg. 212
- Digital devices
- Reference books
- Manila paper

- Written assignments - Oral questions - Observation

Electricity and Magnetism

Electrostatics - Applications of electrostatics in day-to-day life

By the end of the lesson, the learner should be able to:

- Describe applications of electrostatics in various fields
- Explain safety measures against electrostatic hazards
- Connect electrostatics to spray painting, photocopiers, air purifiers and lightning protection

In groups, learners are guided to:

- Research applications of electrostatics using digital devices
- Discuss spray guns, photocopiers, fingerprinting and electrostatic precipitators
- Discuss lightning formation and safety measures during thunderstorms
- Present findings on applications and safety to class

How do electrostatic precipitators help reduce air pollution from factory emissions?

- Triumph Physics 10 pg. 212
- Digital devices
- Reference books
- Manila paper

- Written assignments - Oral questions - Observation

Electricity and Magnetism

Current Electricity - Terminologies used in current electricity
Current Electricity - Relationship between potential difference and current through a conductor

By the end of the lesson, the learner should be able to:

- Define current, potential difference, resistance and electromotive force
- State SI units for electrical quantities
- Connect electrical terms to household appliances like bulbs, heaters and phone chargers

In groups, learners are guided to:

- Use digital devices or reference books to find meanings of electrical terms
- Discuss current, potential difference, e.m.f. and internal resistance
- Identify symbols and units for electrical quantities
- Share findings on terminology in class discussion

How is electromotive force different from potential difference in an electrical circuit?

- Triumph Physics 10 pg. 213
- Digital devices
- Reference books
- Writing materials
- Triumph Physics 10 pg. 214
- Nichrome wire
- Ammeter
- Voltmeter
- Variable resistor
- Dry cells

- Oral questions - Written assignments - Observation

Electricity and Magnetism

Current Electricity - Ohm's Law and electrical resistance

By the end of the lesson, the learner should be able to:

- State Ohm's Law and apply V=IR to solve problems
- Calculate resistance, current or voltage using Ohm's Law
- Connect Ohm's Law to selecting appropriate fuses for electrical appliances

In groups, learners are guided to:

- Derive mathematical relationship V=IR from experimental data
- Define the ohm as unit of resistance
- Solve numerical problems using Ohm's Law
- Discuss practical applications of Ohm's Law

Why is it important to know the resistance of a component when designing electrical circuits?

- Triumph Physics 10 pg. 216
- Graph paper
- Calculators
- Exercise books

- Written assignments - Oral questions - Observation

Electricity and Magnetism

Current Electricity - Ohmic and non-ohmic resistors

By the end of the lesson, the learner should be able to:

- Distinguish between ohmic and non-ohmic resistors
- Draw current-voltage graphs for ohmic and non-ohmic conductors
- Connect non-ohmic behaviour to filament bulbs dimming when voltage drops

In groups, learners are guided to:

- Set up circuit with carbon resistor and record current-voltage readings
- Replace with filament bulb and record readings
- Plot I-V graphs for both and compare shapes
- Discuss why filament bulb resistance changes with temperature

Why does a filament bulb's resistance increase as it gets hotter?

- Triumph Physics 10 pg. 217
- Carbon resistor
- Filament bulb
- Ammeter
- Voltmeter
- Dry cells

- Practical assessment - Written assignments - Observation

Electricity and Magnetism

Current Electricity - Effect of length on resistance of conductors

By the end of the lesson, the learner should be able to:

- Investigate how length affects resistance of a conductor
- Establish that resistance is directly proportional to length
- Connect length-resistance relationship to why extension cords have higher resistance

In groups, learners are guided to:

- Set up circuit with nichrome wire mounted on scale
- Measure resistance for different lengths of wire
- Plot resistance against length graph
- Discuss the direct proportionality between length and resistance

Why do longer wires have higher resistance than shorter wires of the same material?

- Triumph Physics 10 pg. 219
- Nichrome wire (100 cm)
- Ammeter
- Voltmeter
- Dry cells

- Practical assessment - Written assignments - Observation

Electricity and Magnetism

Current Electricity - Effect of cross-sectional area on resistance

By the end of the lesson, the learner should be able to:

- Investigate how cross-sectional area affects resistance
- Establish inverse relationship between area and resistance
- Connect area-resistance relationship to thick cables used in power transmission lines

In groups, learners are guided to:

- Set up circuit with nichrome wires of different thicknesses
- Measure resistance for 0.2 mm and 0.4 mm diameter wires
- Compare average resistance values
- Discuss why thicker wires have lower resistance

Why are thick copper cables used for transmitting electricity over long distances?

- Triumph Physics 10 pg. 221
- Nichrome wires of different diameters
- Ammeter
- Voltmeter
- Dry cells

- Practical assessment - Written assignments - Observation

Electricity and Magnetism

Current Electricity - Effect of material type and temperature on resistance

By the end of the lesson, the learner should be able to:

- Investigate how material type and temperature affect resistance
- Define and use resistivity in calculations
- Connect material properties to why copper is preferred for electrical wiring over nichrome

In groups, learners are guided to:

- Compare resistance of nichrome and copper wires of same dimensions
- Heat nichrome wire and measure resistance change
- Discuss resistivity values of different materials
- Calculate resistance using R = ρl/A

Why does the resistance of metals increase when they are heated?

- Triumph Physics 10 pg. 222
- Nichrome and copper wires
- Hot water
- Ammeter
- Voltmeter

- Practical assessment - Written assignments - Oral questions

Electricity and Magnetism

Current Electricity - Relationship between e.m.f., voltage, current, resistance and internal resistance

By the end of the lesson, the learner should be able to:

- Derive and apply the equation E = I(R + r)
- Calculate internal resistance and terminal voltage
- Connect internal resistance to why car batteries struggle to start engines in cold weather

In groups, learners are guided to:

- Set up circuit with cell, ammeter, voltmeter and variable resistor
- Record voltage and current for different resistance values
- Plot V against I graph and determine e.m.f. and internal resistance
- Solve problems using E = I(R + r)

Why is the terminal voltage of a battery always less than its e.m.f. when current flows?

- Triumph Physics 10 pg. 225
- Dry cell
- Ammeter
- Voltmeter
- Variable resistor

- Practical assessment - Written assignments - Observation

Electricity and Magnetism

Current Electricity - Types of resistors and resistor networks

By the end of the lesson, the learner should be able to:

- Identify fixed and variable resistors and state their uses
- Draw symbols for different types of resistors
- Connect resistor types to volume controls in radios and dimmer switches in homes

In groups, learners are guided to:

- Identify fixed resistors (carbon) and variable resistors (rheostat, potentiometer, thermistor)
- Draw circuit symbols for each resistor type
- Discuss uses of each type of resistor
- Complete table showing resistor types, symbols and uses

How do variable resistors help control the brightness of lights and volume of sound?

- Triumph Physics 10 pg. 227
- Various resistors
- Circuit symbol charts
- Exercise books

- Oral questions - Written assignments - Observation

Electricity and Magnetism

Current Electricity - Measurement of resistance using resistor colour codes

By the end of the lesson, the learner should be able to:

- Read resistance values from colour coded resistors
- Calculate resistance and tolerance from colour bands
- Connect colour coding to identifying resistor values when repairing electronic devices

In groups, learners are guided to:

- Study resistor colour code chart
- Observe colour bands on fixed carbon resistors
- Calculate resistance values using colour codes
- Verify calculated values using digital multimeter

How do the colour bands on a resistor indicate its resistance value and tolerance?

- Triumph Physics 10 pg. 228
- Fixed carbon resistors
- Colour code chart
- Digital multimeter

- Practical assessment - Written assignments - Observation

Electricity and Magnetism

Current Electricity - Measurement of resistance using ammeter-voltmeter and Wheatstone bridge

By the end of the lesson, the learner should be able to:

- Measure resistance using ammeter-voltmeter method
- Explain the working principle of Wheatstone bridge
- Connect Wheatstone bridge to precision measurements in laboratory instruments

In groups, learners are guided to:

- Set up circuit to measure resistance using ammeter-voltmeter method
- Calculate resistance using R = V/I
- Set up Wheatstone bridge and balance it for zero deflection
- Calculate unknown resistance using bridge formula

Why is the Wheatstone bridge more accurate than the ammeter-voltmeter method?

- Triumph Physics 10 pg. 231
- Ammeter
- Voltmeter
- Wheatstone bridge
- Galvanometer

- Practical assessment - Written assignments - Observation

Electricity and Magnetism

Current Electricity - Measurement of resistance using metre bridge

By the end of the lesson, the learner should be able to:

- Describe the metre bridge as a practical form of Wheatstone bridge
- Use metre bridge to determine unknown resistance
- Connect metre bridge principle to strain gauges used in weighing scales

In groups, learners are guided to:

- Set up metre bridge circuit with known and unknown resistors
- Slide jockey along wire until galvanometer shows zero deflection
- Record balance lengths and calculate unknown resistance
- Compare calculated values with standard values

How does the metre bridge use the principle of balanced ratios to measure resistance?

- Triumph Physics 10 pg. 233
- Metre bridge
- Known resistor
- Unknown resistor
- Galvanometer

- Practical assessment - Written assignments - Observation

Electricity and Magnetism

Current Electricity - Measurement of resistance using metre bridge

By the end of the lesson, the learner should be able to:

- Describe the metre bridge as a practical form of Wheatstone bridge
- Use metre bridge to determine unknown resistance
- Connect metre bridge principle to strain gauges used in weighing scales

In groups, learners are guided to:

- Set up metre bridge circuit with known and unknown resistors
- Slide jockey along wire until galvanometer shows zero deflection
- Record balance lengths and calculate unknown resistance
- Compare calculated values with standard values

How does the metre bridge use the principle of balanced ratios to measure resistance?

- Triumph Physics 10 pg. 233
- Metre bridge
- Known resistor
- Unknown resistor
- Galvanometer

- Practical assessment - Written assignments - Observation

Electricity and Magnetism

Current Electricity - Measurement of resistance using metre bridge

By the end of the lesson, the learner should be able to:

- Describe the metre bridge as a practical form of Wheatstone bridge
- Use metre bridge to determine unknown resistance
- Connect metre bridge principle to strain gauges used in weighing scales

In groups, learners are guided to:

- Set up metre bridge circuit with known and unknown resistors
- Slide jockey along wire until galvanometer shows zero deflection
- Record balance lengths and calculate unknown resistance
- Compare calculated values with standard values

How does the metre bridge use the principle of balanced ratios to measure resistance?

- Triumph Physics 10 pg. 233
- Metre bridge
- Known resistor
- Unknown resistor
- Galvanometer

- Practical assessment - Written assignments - Observation

Electricity and Magnetism

Current Electricity - Effective resistance of resistors in series

By the end of the lesson, the learner should be able to:

- Derive formula for effective resistance of resistors in series
- Calculate total resistance and voltage drops in series circuits
- Connect series circuits to Christmas lights where one faulty bulb affects all others

In groups, learners are guided to:

- Connect resistors in series with ammeter and voltmeters
- Measure total voltage and individual voltage drops
- Verify that R_total = R₁ + R₂ + R₃
- Solve numerical problems on series resistor networks

Why does adding more resistors in series increase the total resistance of a circuit?

- Triumph Physics 10 pg. 234
- Resistors
- Ammeter
- Voltmeters
- Dry cells

- Practical assessment - Written assignments - Observation

Electricity and Magnetism

Current Electricity - Effective resistance of resistors in series

By the end of the lesson, the learner should be able to:

- Derive formula for effective resistance of resistors in series
- Calculate total resistance and voltage drops in series circuits
- Connect series circuits to Christmas lights where one faulty bulb affects all others

In groups, learners are guided to:

- Connect resistors in series with ammeter and voltmeters
- Measure total voltage and individual voltage drops
- Verify that R_total = R₁ + R₂ + R₃
- Solve numerical problems on series resistor networks

Why does adding more resistors in series increase the total resistance of a circuit?

- Triumph Physics 10 pg. 234
- Resistors
- Ammeter
- Voltmeters
- Dry cells

- Practical assessment - Written assignments - Observation

Electricity and Magnetism

Current Electricity - Effective resistance of resistors in parallel

By the end of the lesson, the learner should be able to:

- Derive formula for effective resistance of resistors in parallel
- Calculate total resistance and branch currents in parallel circuits
- Connect parallel circuits to house wiring where each appliance operates independently

In groups, learners are guided to:

- Connect resistors in parallel with ammeter and voltmeters
- Measure total current and individual branch currents
- Verify that 1/R_total = 1/R₁ + 1/R₂ + 1/R₃
- Solve numerical problems on parallel resistor networks

Why is the total resistance of parallel resistors always less than the smallest individual resistor?

- Triumph Physics 10 pg. 237
- Resistors
- Ammeter
- Voltmeters
- Dry cells

- Practical assessment - Written assignments - Observation

Electricity and Magnetism

Current Electricity - Effective resistance of resistors in parallel

By the end of the lesson, the learner should be able to:

- Derive formula for effective resistance of resistors in parallel
- Calculate total resistance and branch currents in parallel circuits
- Connect parallel circuits to house wiring where each appliance operates independently

In groups, learners are guided to:

- Connect resistors in parallel with ammeter and voltmeters
- Measure total current and individual branch currents
- Verify that 1/R_total = 1/R₁ + 1/R₂ + 1/R₃
- Solve numerical problems on parallel resistor networks

Why is the total resistance of parallel resistors always less than the smallest individual resistor?

- Triumph Physics 10 pg. 237
- Resistors
- Ammeter
- Voltmeters
- Dry cells

- Practical assessment - Written assignments - Observation

Electricity and Magnetism

Current Electricity - Relationship between voltage, current and power in heating effect

By the end of the lesson, the learner should be able to:

- Derive and apply P = VI, P = I²R and H = I²Rt
- Calculate electrical power and energy consumed
- Connect heating effect to electric kettles, heaters and toasters in homes

In groups, learners are guided to:

- Set up circuit with resistor, ammeter and voltmeter
- Record voltage and current at different settings
- Calculate power using P = VI
- Derive Joule's law of electrical heating H = I²Rt

How does the resistance of a heating element affect the amount of heat produced?

- Triumph Physics 10 pg. 241
- Resistor
- Ammeter
- Voltmeter
- Rheostat

- Written assignments - Oral questions - Observation

Electricity and Magnetism

Current Electricity - Applications of the heating effect of electric current

By the end of the lesson, the learner should be able to:

- Describe applications of electrical heating in various devices
- Explain the role of fuses in circuit protection
- Connect heating applications to cooking appliances, lighting and industrial furnaces

In groups, learners are guided to:

- Research applications of heating effect in cooking appliances, lighting and circuit protection
- Discuss how fuses and circuit breakers protect circuits
- Compare ohmic devices (heaters) and non-ohmic devices (filament bulbs)
- Present findings on applications to class

How do fuses use the heating effect of current to protect electrical circuits?

- Triumph Physics 10 pg. 245
- Digital devices
- Reference books
- Various electrical appliances

- Written assignments - Oral questions - Observation

Electricity and Magnetism

Current Electricity - Applications of the heating effect of electric current

By the end of the lesson, the learner should be able to:

- Describe applications of electrical heating in various devices
- Explain the role of fuses in circuit protection
- Connect heating applications to cooking appliances, lighting and industrial furnaces

In groups, learners are guided to:

- Research applications of heating effect in cooking appliances, lighting and circuit protection
- Discuss how fuses and circuit breakers protect circuits
- Compare ohmic devices (heaters) and non-ohmic devices (filament bulbs)
- Present findings on applications to class

How do fuses use the heating effect of current to protect electrical circuits?

- Triumph Physics 10 pg. 245
- Digital devices
- Reference books
- Various electrical appliances

- Written assignments - Oral questions - Observation

Electricity and Magnetism

Introduction to Electronics - Meaning of insulators, conductors, semiconductors and superconductors

By the end of the lesson, the learner should be able to:

- Define conductors, insulators, semiconductors and superconductors
- Classify materials based on their electrical conductivity
- Connect material classification to selection of wires and insulation in electrical installations

In groups, learners are guided to:

- Set up simple circuit to test conductivity of different materials
- Classify materials as conductors, insulators or semiconductors
- Research meaning of superconductors
- Discuss examples and applications of each material type

What determines whether a material is a good conductor or insulator of electricity?

- Triumph Physics 10 pg. 248
- Simple circuit
- Various materials (copper, iron, wood, plastic, silicon)
- Bulb

- Practical assessment - Oral questions - Observation

Electricity and Magnetism

Introduction to Electronics - Distinguishing materials using energy band theory

By the end of the lesson, the learner should be able to:

- Explain energy band theory and band gaps
- Draw energy band diagrams for conductors, semiconductors and insulators
- Connect band gaps to why LEDs emit light of specific colours

In groups, learners are guided to:

- Draw rectangles showing valence and conduction bands for conductors
- Draw band diagrams for semiconductors with small band gap
- Draw band diagrams for insulators with large band gap
- Compare and classify materials based on band structure

How does the size of the energy gap determine whether a material conducts electricity?

- Triumph Physics 10 pg. 250
- Manila paper
- Coloured pencils
- Markers

- Written assignments - Oral questions - Observation

Electricity and Magnetism

Introduction to Electronics - Electrical behaviour of conductors with varying temperatures

By the end of the lesson, the learner should be able to:

- Investigate how temperature affects resistance of conductors
- Explain why conductor resistance increases with temperature
- Connect temperature effect to why power lines sag more on hot days

In groups, learners are guided to:

- Set up circuit with copper wire, ammeter and voltmeter
- Measure resistance at room temperature
- Heat copper wire and measure new resistance
- Cool wire with ice and compare resistance values

Why does the resistance of copper wire increase when it is heated?

- Triumph Physics 10 pg. 253
- Copper wire
- Ammeter
- Voltmeter
- Hot water
- Ice cubes

- Practical assessment - Written assignments - Observation

Electricity and Magnetism

Introduction to Electronics - Electrical behaviour of insulators with varying temperatures

By the end of the lesson, the learner should be able to:

- Investigate how temperature affects conductivity of insulators
- Explain why insulators maintain high resistance regardless of temperature
- Connect insulator behaviour to safety of rubber gloves used by electricians

In groups, learners are guided to:

- Set up circuit with glass rod and light bulb
- Test conductivity at room temperature
- Heat glass rod and retest conductivity
- Cool glass rod and observe any changes in conductivity

Why do insulators like glass and rubber not conduct electricity even when heated?

- Triumph Physics 10 pg. 254
- Glass rod
- Light bulb
- Dry cells
- Hot water
- Ice cubes

- Practical assessment - Oral questions - Observation

Electricity and Magnetism

Introduction to Electronics - Electrical behaviour of semiconductors with varying temperatures

By the end of the lesson, the learner should be able to:

- Investigate how temperature affects resistance of semiconductors
- Explain why semiconductor resistance decreases with temperature
- Connect semiconductor behaviour to thermistors used in temperature sensors and fire alarms

In groups, learners are guided to:

- Set up circuit with thermistor, ammeter and voltmeter
- Measure resistance at room temperature
- Heat thermistor in hot water and measure resistance
- Cool thermistor in ice water and compare values

Why does the resistance of a thermistor decrease when temperature increases?

- Triumph Physics 10 pg. 255
- Thermistor
- Ammeter
- Voltmeter
- Hot water
- Ice cubes

- Practical assessment - Written assignments - Observation

Electricity and Magnetism

Introduction to Electronics - Intrinsic semiconductors
Introduction to Electronics - Extrinsic semiconductors

By the end of the lesson, the learner should be able to:

- Define intrinsic semiconductors and give examples
- Explain conduction in pure silicon and germanium
- Connect intrinsic semiconductors to the base material used in manufacturing computer chips

In groups, learners are guided to:

- Read presentation on intrinsic and extrinsic semiconductors
- Discuss meaning of intrinsic semiconductors
- Explain equal numbers of electrons and holes in pure semiconductors
- Discuss limited conductivity at room temperature

Why do intrinsic semiconductors have low conductivity at room temperature?

- Triumph Physics 10 pg. 257
- Digital devices
- Reference books
- Writing materials
- Triumph Physics 10 pg. 258
- Periodic table

- Oral questions - Written assignments - Observation

Electricity and Magnetism

Introduction to Electronics - Formation of n-type semiconductors

By the end of the lesson, the learner should be able to:

- Explain formation of n-type semiconductors through doping
- Draw diagrams showing electron distribution in n-type materials
- Connect n-type semiconductors to one half of diodes and transistors used in phones

In groups, learners are guided to:

- Research formation of n-type semiconductors
- Discuss addition of group V elements (phosphorus, arsenic)
- Draw silicon lattice doped with phosphorus showing free electron
- Identify electrons as majority charge carriers

Why are group V elements used to create n-type semiconductors?

- Triumph Physics 10 pg. 259
- Digital devices
- Manila paper
- Coloured pencils

- Written assignments - Oral questions - Observation

Electricity and Magnetism

Introduction to Electronics - Formation of p-type semiconductors

By the end of the lesson, the learner should be able to:

- Explain formation of p-type semiconductors through doping
- Draw diagrams showing hole distribution in p-type materials
- Connect p-type semiconductors to the other half of diodes and transistors

In groups, learners are guided to:

- Research formation of p-type semiconductors
- Discuss addition of group III elements (boron, gallium)
- Draw germanium lattice doped with boron showing holes
- Identify holes as majority charge carriers

Why are group III elements used to create p-type semiconductors?

- Triumph Physics 10 pg. 260
- Digital devices
- Manila paper
- Coloured pencils

- Written assignments - Oral questions - Observation

Electricity and Magnetism

Introduction to Electronics - Applications of conductors, semiconductors, insulators and superconductors

By the end of the lesson, the learner should be able to:

- Describe applications of different material types in electronics
- Explain role of semiconductors in diodes, transistors and integrated circuits
- Connect material applications to everyday devices like phones, computers and MRI machines

In groups, learners are guided to:

- Research applications of conductors, semiconductors, insulators and superconductors
- Discuss applications in electrical wiring, electronics, circuit protection and medical imaging
- Complete table showing materials, types and applications
- Present findings on applications to class

How do semiconductors enable the functioning of modern electronic devices?

- Triumph Physics 10 pg. 261
- Digital devices
- Reference books
- Manila paper

- Written assignments - Oral questions - Observation

Electricity and Magnetism

Introduction to Electronics - Applications of conductors, semiconductors, insulators and superconductors

By the end of the lesson, the learner should be able to:

- Describe applications of different material types in electronics
- Explain role of semiconductors in diodes, transistors and integrated circuits
- Connect material applications to everyday devices like phones, computers and MRI machines

In groups, learners are guided to:

- Research applications of conductors, semiconductors, insulators and superconductors
- Discuss applications in electrical wiring, electronics, circuit protection and medical imaging
- Complete table showing materials, types and applications
- Present findings on applications to class

How do semiconductors enable the functioning of modern electronic devices?

- Triumph Physics 10 pg. 261
- Digital devices
- Reference books
- Manila paper

- Written assignments - Oral questions - Observation